Pioneer SVM-1000 - Manual (Page 19)

USING THE EFFECT FUNCTION
19
En
English
USING TOUCH EFFECTS
With TOUCH effects, many effects can be created by touching the
video EFFECT performance monitor.
When master monitor is off
When master monitor is on
1 Touch the effect category button [TOUCH].
• The [
TOUCH] button will be highlighted and an animation
will appear.
• The TOUCH effect screen will be displayed.
2 Select an effect from the effect select buttons.
• The selected button will be highlighted and an animation
will appear.
• For descriptions of each effect, refer to P. 25.
3 Use the CH SELECT dial to select the channel to which you
wish to apply the effect.
• The selected effect channel will be highlighted.
• If [
MIC] is selected, the audio effect will be applied to both
MIC 1 and MIC 2. There will be no effect on the video.
4 Touch the effect mode select button to select the effect
mode.
• The selected button will be highlighted and an animation
will appear.
5 Set the EFFECT ON/OFF button to ON to apply the effect.
• Each time the button is pressed it will switch between ON
and OFF (whenever power is first turned ON, the setting
defaults to OFF).
• When effect is ON, the button flashes.
6 Touch the video effect performance monitor to change the
location information for the effect.
• When the [
HOLD] button is ON, the track from the point
where the display is touched to where it is released will be
saved and repeatedly output.
• Each time the [ HOLD] button is touched it will switch
between ON and OFF.
• Whenever power is first turned ON, the setting defaults to
OFF.
Pattern
Rotate the
VIDEO FX PATTERN/TEXT BANK dial to select a video
effect pattern of the selected video effect.
For descriptions of the video pattern changes caused by rotating
the
VIDEO FX PATTERN/TEXT BANK dial, refer to P. 25.
Parameter 1
Rotate the
TIME/PARAMETER dial to adjust the temporal
parameters for the selected effect.
For descriptions on the changes in parameter 1 caused by rotating
the
TIME/PARAMETER dial, refer to P. 25.
Parameter 2
Rotate the
LEVEL/DEPTH dial to adjust the quantitative
parameters for the selected effect.
For descriptions on the changes in parameter 2 caused by rotating
the
LEVEL/DEPTH dial, refer to P. 25.
VISUALIZER MODE
A video is created internally, and TOUCH effects can be applied to
it.
This is effective when no input video is present.
1 Effect select
buttons Select and touch the desired effect icon
from the 12 TOUCH effects.
2 Effect mode
select buttons A: Touch to apply the effect to audio only.
AV: Touch to apply the effect to both
audio and video.
V: Touch to apply the effect to video only.
3 Video EFFECT
performance
monitor Touch to change the location information
for TOUCH effects.
4 Video effect
pattern display Rotate the VIDEO FX PATTERN/TEXT
BANK dial to select the video effect
pattern. The pattern will differ depending
on the effect type.
5 Parameter
display Displays the TOUCH effect parameter.
6 [HOLD] button Touch to hold the effect obtained when
touching the video EFFECT performance
monitor.
2
7
4
5
6
3
1
4
5
7
1
6
2 2 3
7 [VISUALIZER
MODE] button Internally creates a video image to which
TOUCH effects can be applied.
01_SVM-1000_En.book 19 ページ ２００７年１０月１６日 火曜日 午前９時２２分