Pioneer SVM-1000 - Manual (Page 20)

USING THE EFFECT FUNCTION
20
En
USING TEXT EFFECTS
TEXT effects can be instantaneously set in-sync with the BPM
(Beat Per Minute) of the track, enabling you to apply various TEXT
effects to the rhythm.
When master monitor is off
When master monitor is on
1 Touch the [BPM AUTO/TAP] button to select the BPM (=Beat
Per Minute) measurement mode.
AUTO: The BPM is automatically measured from the input
music signal.
TAP: Tap the TAP button with your finger to manually input the
BPM.
• Whenever power is first turned ON, [ AUTO] is selected by
default.
• The selected mode ([ AUTO]/[TAP]) will appear in the
display.
• When a BPM cannot be measured automatically, the BPM
display in the display will flash.
• The measurement range of AUTO mode is BPM=70 to 180.
Depending on the track, the BPM may not be accurately
measured. In these cases, use TAP mode to manually input
the BPM.
2 Touch the effect category button [TEXT].
• The [
TEXT] button will be highlighted and an animation will
appear.
• The TEXT effect screen will be displayed.
3 Select a text motion using the motion select buttons.
• The selected button will be highlighted and an animation
will appear.
• For a description of each effect, refer to P. 30.
4 Choose a text from TEXT BANK.
• Rotate the
VIDEO FX PATTERN/TEXT BANK dial to select
TEXT BANK and touch the [ TEXT BANK] button to select the
text.
• The selected button will be highlighted.
5 Use the CH SELECT dial to select the channel to which you
wish to apply the effect.
• The selected effect channel display will be highlighted.
• If [
MIC] is selected, the audio effect will be applied to both
MIC 1 and MIC 2. There will be no effect on the video.
6 Touch the effect mode select buttons to choose the effect
mode.
• The selected button will be highlighted and an animation
will appear.
A: An effect will be applied to the audio only.
AV: An effect will be applied to both the audio and video.
V: An effect will be applied to the video only.
1 Motion select
buttons Select and touch the desired motion icon
from the 6 TEXT motions.
2 [TEXT BANK]
buttons Touch the text button of your choice from
the 6 texts.
3 TEXT BANK
display Rotate the VIDEO FX PATTERN/TEXT
BANK dial to select a TEXT BANK from
the 10 available.
4 Effect mode
select button A: Touch to apply the effect to audio only.
AV: Touch to apply the effect to both
audio and video.
V: Touch to apply the effect to video only.
5 Video EFFECT
monitor Monitors the TEXT effects.
6 [TEXT EDIT]
button Touch while editing the text rows of the
TEXT BANK to enter the TEXT EDIT
screen.
1
2
5
6
3
7
8
9
4
3
1
2
4
7
5
8
9
6
3
7 [BPM
AUTO/TAP]
button Touch to switch the measurement
method of the BPM between AUTO and
TAP. Pressing the
TAP button will also
switch this to TAP.
8 Parameter
display Displays the measured BPM and effect
parameters.
9 Beat
button/beat
display Touch to select the multiplication factor
of the beat calculated from the BPM for
synchronization of effects.
01_SVM-1000_En.book 20 ページ ２００７年１０月１６日 火曜日 午前９時２２分