Hardware setup, Mic setting system settings, Mic setting – Pioneer SVM-1000 User Manual
Page 42: System settings
HARDWARE SETUP
42
En
HARDWARE SETUP
Initiate hardware setup
1
Turn the POWER switch on while pressing the UTILITY (SET
UP) button.
• Continue depressing the
UTILITY (SET UP) button while the
word [
Pro DJ] is displayed.
• The hardware setup screen will be displayed.
MIC SETTING
1
Touch [MIC]
The MIC setting screen will be displayed.
2
Choose settings by touching [
] or [].
3
Touch [SAVE] to save the settings.
The settings will not be implemented unless [
SAVE] is
touched.
SYSTEM SETTINGS
1
Touch [SYSTEM].
The SYSTEM setting screen will be displayed.
2
Choose settings by touching [
] or [].
3
Touch [SAVE] to save the settings.
The settings will not be implemented unless [
SAVE] is
touched.
OUTPUT TO
BOOTH MONITOR
Set whether or not to output the audio
from the MIC to the booth monitor.
TALK OVER
THRESHOLD LEVEL
Adjust the sensitivity of talk over.
TALK OVER LEVEL
Adjust the level of talk over.
HI
10
9
8
7
6
5
4
3
2
1
0
10
9
8
7
6
5
4
3
2
1
0
UTILITY
(SET UP)
POWER
VIDEO SYSTEM
Selects the video signal format.
DIGITAL OUT MAX
LEVEL
Selects the maximum level of the digital
out circuit.
01_SVM-1000_En.book 42 ページ ２００７年１０月１６日 火曜日 午前９時２２分