Pioneer SVM-1000 - Manual (Page 41)

PERFORM UTILITY SETUP
41
En
English
PERFORM VIDEO MONITOR SETUP
Set the video monitor output method.
Video monitor setup
1 Hold the UTILITY (SET UP) button depressed.
This will initiate the utility setup mode.
2 Touch [VIDEO MONITOR].
The video monitor setup screen will be displayed.
• When turning the power ON, [ MASTER] will be selected.
3 Touch each applicable button.
Touch each applicable button on the screen to operate the
video monitor setup.
4 Touch [EXIT].
This will end the utility setup mode.
KEYBOARD LANGUAGE SETUP
By connecting a keyboard to the USB connector, text can be
entered through the keyboard during text edit mode (P. 22). Follow
these steps to set up the connected keyboard type.
Keyboard language setup
1 Hold the UTILITY (SET UP) button depressed.
This initiates the utility setup mode.
2 Touch [KEYBOARD LANGUAGE].
The keyboard language setup screen will be displayed.
• When turning the power ON, [ UK ENGLISH] will be selected.
3 Touch each applicable button.
Touch each applicable button on the perform keyboard
language setup.
4 Touch [EXIT].
This will end the utility setup mode.
* With keyboards other than those listed, the characters
actually appearing may be different from those pressed.
MASTER The master output is sent directly to the
monitor output.
MIRROR OF
MASTER The master output is flipped horizontally
and sent to the monitor output.
MASTER &
CHANNEL Both master output and channel output
are sent to the monitor output.
CHANNEL All channels’ outputs are sent to the
monitor output.
01_SVM-1000_En.book 41 ページ ２００７年１０月１６日 火曜日 午前９時２２分