Pioneer SVM-1000 - Manual (Page 33)

USING THE JPEG VIEWER
33
En
English
Operating in FADER MODE
Assign multiple JPEG files selected from the JPEG BOX to the
selected channel. The assigned files will alternate together with
the timing of the raising of the channel fader.
1
Touch the [FADER MODE] button to select FADER mode.
2 Touch [JPEG BOX] and select the JPEG file you wish to assign.
The border of the selected [
JPEG BOX] will become white.
Touch the selected [ JPEG BOX] again to cancel the selection.
3 Touch the [ASSIGN CH SELECT] button of the channel to
which you wish to assign files.
The channel monitor display will show the JPEG image, and
you will be able to mix it with other channels and/or
manipulate it by applying effects.
Touch the [ ASSIGN CH SELECT] button for a different channel
during channel assignment to switch the assigned channel.
To cancel channel assignment, touch the [ ASSIGN CH
SELECT] button for the selected channel during channel
assignment.
4 Operate the fader.
The JPEG files assigned to that channel will alternate at the
same timing as the rising channel fader.
Deleting JPEG files downloaded to the JPEG BOX
1 Touch the [CLEAR] button to select JPEG BOX clear mode.
During JPEG BOX clear mode, the [
CLEAR] button will flash.
2 Touch the [JPEG BOX] and select the JPEG file you wish to
delete.
Deleting the JPEG BOX will not delete the loaded JPEG files in
the media.
3 Touch the [CLEAR] button to exit JPEG BOX clear mode.
• JPEG files used must be 12 MB or less in size.
• If the original JPEG file does not fit within 640 x 480 pixels,
the file will be automatically resized to 640 x 480 pixels when
downloaded to the SVM-1000.
01_SVM-1000_En.book 33 ページ ２００７年１０月１６日 火曜日 午前９時２２分