Pioneer SVM-1000 - Manual (Page 29)

USING THE EFFECT FUNCTION
29
En
English
(*1) When the [ HOLD] button is set to ON, you can record the track of your finger touching the touch panel for a maximum of 8 seconds.
(*2) The effect will not become visible unless the video effect performance monitor is touched.
(*3) When effect is set to ON, random effects are applied.
(*4) When effect is set to OFF, effect sounds cannot be heard even on monitor.
12. DR
OP (*3)
AUDIO Flanger effect is applied. Move
finger on touch panel to right-
left to change effect volume. Touch more toward right side to
enhance effect. Touch more toward
left side to decrease effect. – – Rotate the dial
clockwise to enhance
the effect. When dial is
rotated fully
counterclockwise, only
original sound is
output.
VIDEO Outputs an image of a circle with color in motion.
PATTERN1 Outputs an image of a circle
with dot designs. The circle moves towards the
touched point. Sets the size of the
circle. 1 to 10 Sets the balance
between the original
video and the effect
video.
PATTERN2 Outputs an image of a circle
with border designs.
PATTERN3 Outputs an image of a circle
with vertically stretched image.
PATTERN4 Outputs an image of a circle
with original image.
01_SVM-1000_En.book 29 ページ ２００７年１０月１６日 火曜日 午前９時２２分