Pioneer SVM-1000 - Manual (Page 38)

PERFORM UTILITY SETUP
38
En
* The MIDI SNAP SHOT outputs all MIDI commands except MIDI START/STOP.
CENTER PANEL AREA
BOOTH MONITOR VR Bn 19 dd 0 to 127
EFFECT
AUTO/TAP BTN Bn 45 dd OFF=0, ON=127
TAP BTN Bn 4E dd OFF=0, ON=127
EFFECT CUE BTN Bn 4B dd OFF=0, ON=127
CH SELECT SW For EFFECT SELECT and
CHANNEL SELECT, the
logical sum of both values
is sent (EFFECT SELECT is
not implemented).
CHARACTER
SELECT
SW Cn pc
TIME SW Bn 0D MSB Bn 2D LSB
PARAMETER 1 value;
FLANGER, PHASER, FILTER
changed to 1/2 value;
minus values are
converted to positive.
LEVEL/DEPTH VR Bn 5B dd 0 to 127
EFFECT ON/OFF BTN Bn 40 dd OFF=0, ON=127
MIC HI VR Bn 1E dd 0 to 127
LOW VR Bn 1F dd 0 to 127
(FADER START)
FADER START BTN Bn 58 dd OFF=0, ON=127
BTN Bn 59 dd OFF=0, ON=127
BTN Bn 5A dd OFF=0, ON=127
BTN Bn 5D dd OFF=0, ON=127
(HEAD PHONES)
MIXING VR Bn 1B dd 0 to 127
LEVEL VR Bn 1A dd 0 to 127
Timing Clock FB
MIDI
START BTN FA
STOP BTN FC
Category Switch Name Switch Type
MIDI Message
Commnets
MSB LSB
Category Switch Name Switch Type
MIDI Message
Commnets
MSB LSB
UTILITY BTN — — — — — —
VIDEO EQ BTN — — — — — —
JPEG VIEWER BTN — — — — — —
VIDEO SOLO
MODE BTN — — — — — —
FADER AV SYNC BTN — — — — — —
01_SVM-1000_En.book 38 ページ ２００７年１０月１６日 火曜日 午前９時２２分