Universal Audio UAD POWERED PLUG-INS ver.6.1 - Manual (Page 176)

UAD Powered Plug-Ins Manual - 176 - Chapter 13: Cambridge EQ
Master Level
Knob
This control adjusts the signal output level of Cambridge EQ. This
may be necessary if the signal is dramatically boosted or re-
duced by the EQ settings. The available range is ±20 dB.
A/B Selector
Button
The A/B Selector switches between two separate sets of Cam-
bridge EQ plug-in values. This feature enables easy switching
between two completely independent EQ curves which can be
useful for comparison purposes or for automating radical tim-
bre changes. Both the A and B curves reside within a single
Cambridge EQ preset.
Click the A/B Selector button to switch between the two curves. When A is
displayed, the button and the EQ response curve is yellow. When B is dis-
played, the button and the curve is green.
Note: To reset the A or B curve to a null (flat) response, control-click the A/B
Selector button. The active curve will be nulled.
Note: To copy one curve to another, shift-click the button. The active curve will
be copied to the inactive curve.
EQ Enable
Button
This button enables or disables the Cambridge EQ alto-
gether. You can use this switch to compare the processed
settings to that of the original signal, or to bypass the plug-
in to reduce UAD DSP load (load is not reduced if
“UAD-2
DSP LoadLock” on page 74 is enabled).