Universal Audio UAD POWERED PLUG-INS ver.6.1 - Manual (Page 353)

UAD Powered Plug-Ins Manual - 353 - Chapter 33: Neve 1073 Equalizer
Neve 1073SE
Controls
The Neve 1073SE controls are exactly the same as the Neve 1073. Please re-
fer to the Neve 1073 section for Neve 1073SE control descriptions (see
“Neve 1073 and 1073SE Controls” on page 349 ).
Neve 1073 Latency
The Neve 1073 (but not the 1073SE) uses an internal upsampling technique
to facilitate its amazing sonic quality. This upsampling results in a slightly
larger latency than other UAD plug-ins. The latency, and its compensation, is
identical to that of the UAD Precision Equalizer. See
“Compensating Upsam-
pled Plug-Ins” on page 108 for more information.
The Neve 1073SE does not require additional latency compensation because
it is not upsampled.
Note: Compensating for Neve 1073 is not required if the host application
supports full plug-in delay compensation throughout the signal path, or when
it is used only on the outputs. See
“Host PDC Implementation” on page 101 .
All visual and aural references to the Neve® 1073, 1081, 31102, 88RS, and 33609 products and all
use of AMS-Neve’s trademarks are being made with written permission from AMS-Neve Limited.