Channel controls, Delay a/b, Decay a/b – Universal Audio UAD POWERED PLUG-INS ver.6.1 User Manual
Page 188: Pan a/b, Delay a/b” on
UAD Powered Plug-Ins Manual
- 188 -
Chapter 14: Cooper Time Cube
Channel Controls
The channel controls affect each channel of the processor independently. The
control functionality is identical for each channel. “A” indicates the left chan-
nel and “B” is the right channel.
Delay A/B
Delay controls the delay time for each channel of the processor. The selected
value is shown in the Echo display (
The available delay range for each channel is 5 milliseconds to 2.5 seconds
(2500ms). When Sync is active, beat values from 1/64 to 3/1 can be se-
lected (
).
When the beat value is out of range, the value is displayed in parenthesis.
This occurs in Sync mode when the time of the note value exceeds 2500ms
(as defined by the current tempo of the host application). See
for detailed information about tempo synchronization.
Tip:
Click the knob then use the computer keyboard arrow keys to incre-
ment/decrement beat values in Sync mode.
Decay A/B
Decay sets the amount of processed signal fed back into its input (feedback).
At the minimum value, one delayed repeat is heard. Higher values (clockwise)
increase the number of repeats and intensity of the processed signal, with
“near infinite” repeats available at the maximum setting.
Pan A/B
Pan sets the position of the delayed (wet) signal in the stereo field; it does not
affect the unprocessed (dry) signal.
Tip:
Click the “PAN” label text to return the control to center.
Note:
When the plug-in is used in a mono-in/mono-out (“MIMO”) configu-
ration, the Pan knobs do not function and cannot be adjusted.
Figure 61. The channel controls