Universal Audio UAD POWERED PLUG-INS ver.6.1 - Manual (Page 438)

UAD Powered Plug-Ins Manual - 438 - Chapter 42: Precision Enhancer kHz
Mode C
Mode C dynamically enhances the high frequency content. The enhancement
amount is increased as the input signal level increases.
Mode D
Mode D dynamically enhances both high and low frequency content. The en-
hancement amount is increased as the input signal level increases. The kHz
Frequency parameter is disabled in this mode.
All Mode
“All” mode is selected by shift+clicking Mode letters or LEDs. All Mode ex-
pands all frequencies of the input signal. The enhancement amount is in-
creased as the input signal level increases. The kHz Frequency parameter is
disabled in this mode.
Speed The Speed parameter defines the attack and release char-
acteristic of the enhancement process.
Fast
In Fast mode, the enhancement processor has a quick response time of 30ms,
which yields a more percussive “bite” and/or a more aggressive sound.
Slow
Slow mode has a slower response time of 180ms which can deliver a
smoother sound overall.
kHz Frequency The kHz Frequency parameter defines the cutoff fre-
quency for the enhancement process in Mode A and
Mode C. Frequencies above this value are enhanced
by the processor. The available range is 1.00 kHz to
10.0 kHz.
Note: kHz Frequency is disabled in Modes B/D/All.
Output Output controls the signal level that is output
from the plug-in. The available range is –20
dB to 0 dB.