Gain reduction meter, Power, Extra presets – Universal Audio UAD POWERED PLUG-INS ver.6.1 User Manual
Page 426: Webzine article
UAD Powered Plug-Ins Manual
- 426 -
Chapter 39: Precision Buss Compressor
Gain Reduction
Meter
The Gain Reduction meter dis-
plays the amount of gain re-
duction occurring within the
compressor.
More blue bars moving to the left indicate more gain reduction is occurring.
The meter range is from –16 dB to 0 dB. Signal peaks are held for 3 seconds
before resetting.
Power
The Power switch determines whether the plug-in is active.
Click the toggle button or the UA logo to change the state.
When the Power switch is in the Off position, plug-in process-
ing is disabled and UAD DSP usage is reduced (unless
is enabled). When the plug-in is bypassed with
this switch (but not by the host bypass), the I/O meters and the Input Level
knob remain active.
Extra Presets
Extra presets for the UAD Precision Buss Compressor that are not in the factory
bank can be downloaded from our website. These presets replicate all the
fixed attack and release setting combinations that are found on large console
VCA-style compressors. The extra presets can be found here:
WebZine Article
An interesting article about the Precision Buss Compressor is available in the
“Ask The Doctors” section of our December 2007 WebZine:
•