Universal Audio UAD POWERED PLUG-INS ver.6.1 - Manual (Page 66)

UAD Powered Plug-Ins Manual - 66 - Chapter 6: UAD Meter & Control Panel
Plug-In Latency
Section
UAD plug-in latency for each device type (UAD-2 and UAD-1) is displayed
here. The calculation is based on the audio I/O interface buffer size and the
sample rate. The window uses this information to calculate and display the re-
sulting latency in samples and milliseconds.
The buffering methods used by UAD-2 and UAD-1 drivers are different for the
two device types, which is why the latency differs between the devices.
Note: Displayed latency does not reflect the actual lowered latency value
when LiveTrack mode ( page 89 ) is active.
Figure 10. The UAD System Information panel