Universal Audio UAD POWERED PLUG-INS ver.6.1 - Manual (Page 439)

UAD Powered Plug-Ins Manual - 439 - Chapter 42: Precision Enhancer kHz
Generally speaking, adjust the Output control after the desired amount of pro-
cessing is achieved with the Effect and kHz Frequency controls. Output does
not affect the amount of enhancement processing, nor does it have any effect
when the plug-in is disabled.
Output Meter
The Output Meter displays the signal level at the output of the plug-in.
When the plug-in is disabled with the plug-in Power switch (but not the host
plug-in enable switch), the output meters still function.
Power The Power switch determines whether the plug-in is active. This
is useful for comparing the processed settings to the original
signal or bypassing the plug-in to reduce the UAD DSP load
(load is not reduced if
“UAD-2 DSP LoadLock” on page 74 is
enabled).
Toggle the switch or click the UA logo to change the Power state; the UA logo
is illuminated in blue when the plug-in is active.
Note: You can click-hold the power switch then drag it like a slider to quickly
compare the enabled/disabled state.