Universal Audio UAD POWERED PLUG-INS ver.6.1 - Manual (Page 26)

UAD Powered Plug-Ins Manual - 26 - Chapter 2: UAD Installation
System Requirements
UAD Powered Plug-Ins require the following hardware and software:
Windows
(x86 and x64)
• Microsoft Windows XP (Home, Professional, or x64 Edition), Windows
Server 2003, Windows Vista, or Windows 7
Mac
(32-bit and 64-bit*)
• Mac OS X 10.5 Leopard, 10.6 Snow Leopard, or 10.7 Lion
• *64-bit drivers are available for UAD-2 devices only
• Processor upgrade cards are not officially supported
All Platforms: • Available PCIe x1/x4/x8/x16 slot for each UAD-2 and UAD-1e card
• Available PCI or PCI-X slot for each UAD-1 card
• ExpressCard/34 or ExpressCard/54 expansion slot for each UAD-2
Solo/Laptop and UAD-1 Xpander
• Available Firewire 400 or Firewire 800 expansion port for UAD-2 Satellite
• 512 MB RAM (1 GB or higher is strongly recommended)
• 600 MB available hard drive space for UAD-2 or UAD-1 install
• 800 MB available HD space for combined UAD-2 plus UAD-1 install
• 1024 x 768 or higher resolution monitor
• CD-ROM drive or internet connection for software installation
• Internet connection required for registration and plug-in authorization
• Compatible VST, RTAS, or Audio Units plug-in host application software
(see Table 1 on page 27 )
• AGP or PCIe graphics video adapter card (PCI graphics not supported)
Supported Hosts
UAD Powered Plug-Ins, when combined with a plug-in host application, is a
technically complex system with many variables. Because the host application
environment is integral to the system but is completely out of our control, we
cannot claim compatibility with all hosts that may claim to support the use of
VST, RTAS, and/or Audio Units plug-ins.