Low band, Low cut – Universal Audio UAD POWERED PLUG-INS ver.6.1 User Manual

Page 351

Advertising
background image

UAD Powered Plug-Ins Manual

- 351 -

Chapter 33: Neve 1073 Equalizer

The available midrange center frequencies are 360 Hz, 700 Hz, 1.6 kHz,
3.2 kHz, 4.8 kHz, 7.2 kHz, and OFF. When OFF is specified, the band is dis-
abled. UAD CPU usage is not reduced when the band is OFF.

Low Band

The low frequency band is controlled by dual-concentric
knobs, delivering smooth shelving equalization.

The inner knob controls the band gain, and the outer ring
selects the frequency or band disable. These two controls
are detailed below.

Low Gain

The equalization gain for the low band is selected with the inner knob of the
dual-concentric control. The available range is approximately ±15 dB.

Rotate the control clockwise to boost the selected low band frequency, or
counter-clockwise to reduce the bass response.

Low Frequency

The Low frequency is selected with the outer ring of the dual-concentric knob
controls. The ring control can be dragged with the mouse, or click directly on
the “silkscreen” text to specify a frequency or disable the Low band.

Note:

You can also click the low shelf symbol above the knob to cycle through

the available values, or shift + click to step back one frequency.

The available low band center frequencies are 35 Hz, 60 Hz, 110 Hz, 220
Hz, and OFF. When OFF is specified, the band is disabled. UAD CPU usage
is not reduced when OFF.

Low Cut

This knob specifies the fixed frequency of the Low Cut filter.
This filter has an 18 dB per octave slope.

The available frequencies are 50 Hz, 80 Hz, 160 Hz, 300
Hz, and OFF. When OFF is specified, the low cut filter is
disabled. UAD CPU usage is not reduced when OFF.

Note:

You can also click the low cut symbol above the knob

to cycle through the available values, or shift + click to step back one fre-
quency.

Advertising
This manual is related to the following products: