Power, Webzine article – Universal Audio UAD POWERED PLUG-INS ver.6.1 User Manual
Page 391
UAD Powered Plug-Ins Manual
- 391 -
Chapter 37: Neve 88RS Channel Strip
Power
The Power switch determines whether the plug-in is active. This is
useful for comparing the processed settings to the original signal
or bypassing the plug-in to reduce the UAD DSP load (load is not
reduced if
“UAD-2 DSP LoadLock” on page 74
Toggle the switch to change the Power state; the switch is illumi-
nated in red when the plug-in is active.
Note:
You can click-hold the power switch then drag it like a slider to quickly
compare the enabled/disabled state.
WebZine Article
An article about the Neve 88RS console can be found in the “Analog Obses-
sion” article of the Universal Audio May 2007 Webzine (Volume 5, Number
4), published on the internet at:
•
All visual and aural references to the Neve® 1073, 1081, 31102, 88RS, and 33609 products and all
use of AMS-NEVE’s trademarks are being made with written permission from AMS-Neve Limited.
The Neve 88RS at Skywalker Sound in California