GE Industrial Solutions Entellisys 5.0 Integrator's Guide - Manual (Page 143)

143
5
20 registers -16 Bits: 1st Char MSB, 2nd Char. LSB
F203 TEXT16 16 CHARACTER ASCII TEXT
F204 TEXT80 80 CHARACTER ASCII TEXT
F205 TEXT12 12 CHARACTER ASCII TEXT
F300 UINT16 FLEXLOGIC BASE TYPE (6 bit type)
The flexlogic BASE type is 6 bits and is combined with a 9 bit descriptor and 1 bit for pro-
tection element to form a 16 bit value. The combined bits are of the form: PTTTTTTD-
DDDDDDDD where P bit if set, indicates that the flexlogic type is associated with a
protection element state and T represents bits for the BASE type, and D represents bits for
the descriptor. The values in square brackets indicate the base type with P prefix [PTTTTTT]
and the values in round brackets indicate the descriptor range.
[0] Off(0) this is boolean FALSE value
[0] On (1)This is boolean TRUE value
[2] CONTACT INPUTS (1 - 96)
[3] CONTACT INPUTS OFF (1-96)
[4] VIRTUAL INPUTS (1-64)
[6] VIRTUAL OUTPUTS (1-64)
[10] CONTACT OUTPUTS VOLTAGE DETECTED (1-64)
[11] CONTACT OUTPUTS VOLTAGE OFF DETECTED (1-64)
[12] CONTACT OUTPUTS CURRENT DETECTED (1-64)
[13] CONTACT OUTPUTS CURRENT OFF DETECTED (1-64)
[14] REMOTE INPUTS (1-32)
[28] INSERT (Via Keypad only)
[32] END
[34] NOT (1 INPUT)
[36] 2 INPUT XOR (0)
[38] LATCH SET/RESET (2 INPUTS)
[40] OR (2-16 INPUTS)
[42] AND (2-16 INPUTS)
Format Name Format Type/Bitmask Format Definition