Alpha Technologies XM3-HP Series - Technical Manual - Manual (Page 112)

Appendix
112 017-882-B0-001 Rev. C2 (10/2013)
Fig. A-2, Placement of Battery Spacer Clips
(for domestic and international 36V battery strings)
(Note: actual placement determined by battery arrangement)
Battery Spacer Clips (international applications)
3 2 1
+
-
+
-
+
-
Battery Spacer Clips (domestic applications)
3 2 1
+
-
+
-
+
-
Battery Spacer Clips
Convection airflow battery cooling relies on proper spacing of batteries installed in the enclosure. Consistent
spacing is achieved by the use of Alpha's Battery Spacer clips. These easy-to-install clips snap over the tops of
AlphaCell batteries allowing for optimal airflow. For domestic applications, use one battery clip per 36V battery
string for optimal spacing. For international applications, use two clips per 36V battery string.