Alpha Technologies XM3-HP Series - Technical Manual User Manual
Page 55
55
017-882-B0-001 Rev. C2 (10/2013)
2.0
Installation
To remotely access the DSM3 Series transponder Web server utilizing a Web browser, use the
following procedure:
For Web server (HTTP) access, port 80 must not be blocked.
NOTE:
1. Connect the laptop or computer’s network interface port to the company’s Ethernet network.
2. Open a Web browser.
3. Enter the DSM3 Series' DHCP designated IP address (e.g., 192.168.1.124) into the Web
browser’s address field. Use square brackets when entering IPV6 IP addresses (e.g.
[FC00:168:40::124]) into the Web browser's address field.
4. The DSM3 Series transponder’s Web server home page will appear (Fig. 2-34).
5. The Web page language will default to the language set on the XM3-HP. To change the
language, click on the
Language menu to select a desired language for the text information
on the Web page. English, Spanish, Portuguese, French and German are the options.
Fig. 2-34, Web Server Home Page
(data values shown for illustration purposes only)
2.2
XM3-HP Start-Up Procedure, continued
2.2.11 Remote Web Server Access
2.0
Installation, continued