Biamp A4 - Manual (Page 100)

Audia-Manual-A4
Control Dialogs
Input
Device IO indicates which hardware
input is associated with that software
channel. Gain In compensates for
different input levels (mic or line), and
should be set so Peak In flashes only
occasionally (6dB headroom). Phan
Pwr
assigns +48 Volt phantom power
to the input for condenser
microphones. Mute In turns the input
signal on/off. Level In adjusts the
relative input volume. Invert In
reverses the polarity of the input
signal.
Right-clicking over certain settings will
provide a menu of additional options.
If standard Audia or AudiaSOLO hardware is being used, then stereo input summing is available
on 12x4 configurations (see Fixed 12-Channel Input )
Output
Device IO indicates which hardware output is associated with
that software channel. Mute Out turns the output signal on/off.
Level Out
adjusts the relative output volume. Invert Out
reverses the polarity of the output signal.
Right-clicking over certain settings will provide a menu of
additional options.
80