Biamp A4 - Manual (Page 220)

Audia-Manual-A4
Result: SET 1 RMCMBWALL 4 2 1 <LF>
Mix-Minus Combiner Attribute Commands Index Value Range
Group State MCMBGROUP SET, GET 1 0 ~ 32
Note : Index1 is the input being addressed. Value is the group; this is represented by a letter in
Audia software, but addressed as a number in ATP commands. (Example: ungroup=0, A=1, B=2,
C=3….)
Equalizer Blocks
Graphic EQ Attribute Commands Index Value Range
EQ Band Level GEQLVLBND SET, SETL, GET, GETL, INC,
DEC 1 -30 ~ 15 *
Bypass All Bands GEQBYPALL SET, GET None 0 = active
1 = bypassed
* Can contain a decimal number.
Note: Index1 represents the filter to be controlled. Graphic EQ filters are numbered from left to
right, and the selected band is displayed in the upper left hand corner of the Graphic EQ dialog
screen in Audia software. Use this number as Index1 for Graphic EQ strings.
Example: Set Device 2 Graphic EQ Bypass All Bands at Instance 9 to bypass.
Command Dev # Attribute Inst ID Index 1 Index 2 Value Line Feed
SET 2 GEQBYPALL 9 None None 1 <LF>
Result: SET 2 GEQBYPALL 9 1 <LF>
Parametric EQ Attribute Commands Index Value Range
EQ Bandwidth PEQBWBND SET, SETL, GET, GETL 1 0.010 ~ 4.000 *
Bypass EQ Band PEQBYPBND SET, GET 1 0 = active
1 = bypassed
200