Biamp A4 - Manual (Page 221)

System Control
Center Freq. PEQFCBND SET, SETL, GET, GETL, INC,
DEC 1 20 ~ 20000
EQ Band Level PEQLVLBND SET, SETL, GET, GETL, INC,
DEC 1 -30 ~ 15 *
Bypass All Bands PEQBYPALL SET, GET None 0 =active
1 = bypassed
* Can contain a decimal number.
Note: Index1 represents the filter to be controlled. Parametric EQ filters are initially numbered
from left to right, and the selected band is displayed in the upper left hand corner of the
Parametric EQ dialog screen in Audia software. Use this number as Index1 for Parametric EQ
strings.
Example: Increment Device 1 Parametric EQ Band Level at Instance 11 Band 2 by 2dB.
Command Dev # Attribute Inst ID Index 1 Index 2 Value Line Feed
INC 1 PEQLVLBND 11 2 None 2 <LF>
Result: INC 1 PEQLVLBND 11 2 2 <LF>
Feedback Suppressor Attribute Commands Index Value Range
Reset All Filters FBSRESET SET None None
Fix All Filters FBFIXALL SET, GET None 0 = not fixed
1 = fix all
Example: Set Device 1 Feedback Suppressor Reset All Filters at Instance 4.
Command Dev # Attribute Inst ID Index 1 Index 2 Value Line Feed
SET 1 FBSRESET 4 None None None <LF>
Result: SET 1 FBSRESET 4 <LF>
Filter Blocks
HPF Attribute Commands Index Value Range
201