Biamp A4 - Manual (Page 219)

System Control
Input Mute SMMUTEIN SET, GET 1 0 = unmuted
1 = muted
Output Mute SMMUTEOUT SET, GET 2 0 = unmuted
1 = muted
Crosspoint Mute SMMUTEXP SET, GET 1 & 2 1 = unmuted
0 = muted
* Can contain a decimal number.
Note: For attributes with 2 Index fields, Index1 is the input/row, and Index2 is the output/column.
Room Combiner Attribute Commands Index Value Range
Wall State RMCMBGROUP SET, GET 1 0 = down
1 = up
Output Level RMCMBLVL SET, SETL, GET, GETL, INC,
DEC 2 -100 ~ 12 *
Output Mute RMCMBMUTE SET, GET 2 0 = unmuted
1 = muted
Group State RMCMBGROUP SET, GET 1 0 ~ 16
* Can contain a decimal number.
+ Note: The behavior of RMCMBGROUP is the same as that of the "Set Selected Group"
commands in the right-click-context menus of the Room Combiner dialog screen in Audia
Software: the specified room is either separate (group 0) or combined with other rooms of the
selected group (1~16). All other rooms maintain their previous group assignments. Index1
represents the room being addressed. As rooms are combined, room levels become ganged, so
only one output level needs to be addressed.
Note: For Wall State, Index1 indicates the wall to be affected and Value indicates the actual wall
state (down=open=combined; up=closed=separated).
Example: Set Device 1 Room Combiner Wall State at Instance 4 Wall 2 to up (close/separate).
Command Dev # Attribute Inst ID Index 1 Index 2 Value Line Feed
SET 1 RMCMBWALL 4 2 None 1 <LF>
199