Biamp A4 - Manual (Page 209)

System Control
Attribute
The Attribute defines the portion of the DSP block to be controlled (fader level, crosspoint mute
etc). The following tables show whether each ATP Attribute supports SET/SETL, GET/GETL,
INC, and DEC
Commands , as well as the Value range that the Attribute will accept.
Index1/Index2 determines whether Index1 , Index2 or BOTH are needed for a ATP String to be
complete.
ATP Strings can address: (click on the links to view the tables in each topic)
Input/Output Blocks
Mixer Blocks
Equalizer Blocks
Filter Blocks
Crossover Blocks
Dynamics Blocks
Router Blocks
Delay Blocks
Control Blocks
Meter Blocks
Generator Blocks
Input/Output Blocks
Analog Inputs Attribute Commands Index Value Range
Input Gain MICGAIN SET, SETL, GET, GETL, INC,
DEC 1 0, 6, 12, 18, 24, 30, 36, 42,
48, 54, 60, 66
Input Level INPLVL SET, SETL, GET, GETL, INC,
DEC 1 -100 ~ 12 *
Phantom Power PHPWR SET, GET 1 0 = off
1 = on
Input Mute INPMUTE SET, GET 1 0 = unmuted
1 = muted
Invert Polarity INPINVRT SET, GET 1 0 =normal
1 = inverted
189