Biamp A4 - Manual (Page 223)

System Control
SET 1 HSFLTGAIN 100 None None -10 <LF>
Result: SET 1 HSFLTGAIN 100 –10 <LF>
All-Pass Filter Attribute Commands Index Value Range
Bandwidth APFLTBWBND SET, SETL, GET, GETL 1 0.01 ~ 4.0 *
Center Freq. APFLTFCBND SET, SETL, GET, GETL 1 20 ~ 20000 *
Filter Bypass APFLTBYPBND SET, GET 1 0 = active
1 = bypassed
Filter Bypass APFLTBYPBND SET, GET 1 0 = active
1 = bypassed
Bypass All APFLTBYPALL SET, GET None 0 =active
1 = bypassed
* Can contain a decimal number.
Note: Index1 represents the filter band to be controlled. All-Pass Filter bands are initially
numbered from left to right, and the selected band is displayed in the upper left hand corner of the
All-Pass Filter dialog screen in Audia software. Use this number as Index1 for All-Pass Filter
strings.
Crossover Blocks
2-Way Attribute Commands Index Value Range
Cut-Off Freq. XOVR2FC SET, SETL, GET, GETL 1 20 ~ 20000
* Can contain a decimal number.
3-Way Attribute Commands Index Value Range
Cut-Off Freq. XOVR3FC SET, SETL, GET, GETL 1 20 ~ 20000
* Can contain a decimal number.
4-Way Attribute Commands Index Value Range
203