Biamp A4 - Manual (Page 126)

Audia-Manual-A4
Channel Settings affects individual channel settings,
but may be applied to all channels. Manual turns on/off
channel gating. NOM Gain turns on/off channel
contribution to NOM (number of open mics) attenuation.
Direct Output
designates channel direct output signal
as Post Gate / Pre NOM, Post Gate / Post NOM, or Off.
(Direct Outputs must be enabled when placing Auto
Mixers from the Object Toolbar.) Set All causes current
Channel Settings to be applied to all channels. Off
Attenuation
determines the amount of attenuation
applied when channel is inactive. Gate Hold Time
determines length of time before channel becomes
inactive, once signal is no longer present.
Logic Outputs affects individual Logic Output settings, but
may be applied to all Logic Outputs. (Logic Outputs must be
designated when placing Auto Mixers from the Object
Toolbar). Logic Output selects Follow Gate, On, or Off
condition of the Logic Output. Invert reverses operation of
the Logic Output (off when channel active). Set All causes
current Logic Output settings to be applied to all channels.
Standard Mixers
Mute In turns the input signal on/off. Level In adjusts
the relative input volume. Ch / Bus assigns inputs to
specific outputs. Mute Out turns the output signal
on/off. Level Out adjusts the relative output volume.
Right-clicking over certain settings will provide a
menu of additional options. Unlike other components,
Mixers allow labeling of inputs/outputs within their
dialog boxes. See Channel Identifier under
Object
Property Sheet .
106