Biamp A4 - Manual (Page 108)

Audia-Manual-A4
EXPI-D
EXPI-D blocks are similar to CobraNet Input blocks, except they
are designed for use with AudiaEXPI-D hardware specifically
and, therefore, automatically allow for Internal Propagation
Delay. CobraNet® Input blocks may be used with AudiaEXPI-D
hardware, but Internal Propagation Delay must be manually set
(1.67mS).
Adjust external signal source so that Peak In flashes only
occasionally (6dB headroom). Mute In turns the input signal
on/off. Level In adjusts the relative input volume. Invert In
reverses the polarity of the input signal.
CobraNet Bundle assigns digital audio data to a particular bundle number.
CobraNet Bundle Numbers are used to match those of the actual AudiaEXPI
hardware being used in the system. Normally, 'unicast' bundles 256 ~ 65,279 are
selectable. These are device specific bundles (for exchange of digital audio with
only one other device). Multicast allows selection of bundles 1 ~ 255, which are
not device specific (for exchange of digital audio with multiple devices). Enable
turns on/off the exchange of CobraNet digital audio data from this device.
Right-clicking over certain settings will provide a menu of
additional options.
88