Biamp A4 - Manual (Page 163)

Component Objects
In the Word document, select Show Gridlines from the Table menu. Each large cell represents
a label. The first four columns are 'left-justified' to create labels for Volume 8 and Select 8
panels, as well as for the 'Volume' (left) section of Volume/Select 8 panels. The last column is
'right-justified' to create labels for the 'Select' (right) section of Volume/Select 8 panels. Left-
click inside any large cell, and begin typing. Use 'Enter' to begin a new line, and again to leave
a blank line. To avoid printing errors, do not change line-spacing or other formatting
parameters. However, if you do not have the default font (Helvetica), or if you wish to change
label appearance, you may select a different font before typing.
Meters
Meters
These Component Objects provide Signal Present, Peak, RMS, and Logic metering functions.
Meters may be connected to any component output, and may be used for diagnostic and setup
purposes, or for applications which require real-time metering. Meters are available in pre-
defined configurations, however, the configuration may be customized when being placed from
the
Object Toolbar .
Once a Component Object is placed into the Layout, all available settings can be accessed by
double-clicking over the object. This produces a Control Dialog Box, which displays the
component controls in a more conventional user interface.
see Signal Present Meter Control Dialog
see Peak Meter Control Dialog
see RMS Meter Control Dialog
see Logic Meter Control Dialog
Right-clicking over the object provides a pop-up menu of options. Control Dialog Boxes for
Meters components can be minimized to create user control surfaces (see
Customizing
Component Objects ).
Control Dialogs
Signal Present Meter
Threshold determines at what level the signal present
indicator will light. Identifier provides a custom label,
when dialog box is minimized (see below).
Right-clicking over certain settings will provide a menu
of additional options. Control Dialog Boxes for Meter
components can be minimized to create user control
143