Burkert Type 8635 - Manual (Page 12)

10 - 8635
G
ENERAL
N
OTES
The following symbols are used in these operating instructions:
marks a work step that you must carry out.
Symbols
ATTENTION!
marks notes on whose non-observance your health or the functioning of the device
will be endangered.
NOTE marks important additional information, tips and recommendations.
Please observe the notes in these operating instructions together with the conditions of use and permitted
data that are specified in the data sheets of the electropneumatic positioner, in order that the device will
function perfectly and remain operable for a long time:
• This device left the manufacturer's factory in a faultless condition with regard to technical safety and
was tested. Proper transport, storage and installation are the prerequisites for continued correct
functioning.
• Keep to standard engineering rules in planning the use of and operating the device!
• Installation and intervention for maintenance work are only allowed by qualified personnel using suitable
tools!
• Observe the current regulations on accident prevention and safety for electrical devices during
operation and maintenance of the device!
• Take suitable precautions to prevent inadvertent operation or damage by unauthorized action!
• On non-observance of these notes and unauthorized interference with the device, we will refuse all
liability and the warranty on device and accessories will become void!
General safety notes
(S/HART)
(PROFIBUS PA)
(HART) indicate chapters or sections of the text which are valid only for certain versions of the
SIDE Control.