Burkert Type 8635 - Manual (Page 26)

24 - 8635
S
YSTEM
D
ESCRIPTION
(S/HART)
OPERATING CONDITIONS
Permissible ambient temperature -25 ... +65 °C (with non-Ex devices or T4/T5)
-25 ... +60 °C (with T6)
System of protection IP 65 to EN 60529
(only with correctly connected cable)
CONFORMITY TO THE FOLLOWING STANDARDS
CE Symbol Conformity wrt. EMC Guideline 89/336/EEC
Low Voltage Guidline 73/23/EEC
Explosion protection (optional) EEX ia IIC T4/T5/T6
MECHANICAL DATA
Housing dimensions, outside (WxHxD) 174 x 88 x 93 mm
Housing material Aluminium
hard anodized and plastic-coated
Seal material NBR / Neoprene
Other exterior parts stainless steel (V4A)
Mass approx. 1.5 kg
ELECTRICAL DATA
Connections 2 M20x1.5 bushings
with screw terminals 0.14 ... 1.5 mm 2
Power supply via setpoint input 4-20 mA
Burden voltage < 12 V DC
Burden resistance 590 Ω at 20 mA and 11.8 V DC
Process value input (option) 4-20 mA
Burden voltage 200 mV at 20 mA
Burden resistance 10 Ω
Binary input mechanical make/break contact
Inductive proximity switch (optional) to DIN EN 60947-5-6 (NAMUR)
Structural shape SJ3.5-G-N
Manufacturer Pepperl+Fuchs
Output signal for
switching amplifier to DIN EN 50227 (NAMUR)
Rated voltage U
0
8 V
Current (sensor uncoated) ≥ 2.1 mA
Current (sensor coated)
≤
1.2 mA
Technical data of the SIDE Control (S/HART)
Technical data (S/HART)