Burkert Type 8635 - Manual (Page 163)

8635 - 161
O
PERATING
S
TRUCTURE
(A
PPENDIX
)
1 CUTOFFmin Î entry mask, value between 0 % and 25 %
2 CUTOFFmax Î entry mask, value between 75 % and 100 %
1 DIR.CMD Î selection menu, rise / fall
1 DIR.ACT Î selection menu, rise / fall
1 SRmin Î entry mask, value between 0 % and 75 %
2 SRmax Î entry mask, value between 25 % and 100 %
2 LIMmax Î entry mask, value between 50 % and 100 %
1 LIMmin Î entry mask, value between 0 % and 50 %
2 X-Time.Close Î entry mask, value between 1 s and 60 s
1 X-Time.Open Î entry mask, value between 1 s and 60 s
1 X-Co.DBDx Î entry mask, value between 0.0 % and 5.0 %
2 X-Co.Kx.Close Î entry mask, value between 1 and 9999
3 X-Co.Kx.Open Î entry mask, value between 1 and 9999
1 DBD Î entry mask, value between 0.0 and 5.0
2 KP Î entry mask, value between 0.00 and 99.99
3 TN Î entry mask, value between 0.5 s and 999.9 s
4 TV Î entry mask, value between 0.0 s and 999.9 s
5 X0 Î entry mask, value between 0 % and 100 %
6 Setpoint Î selection menu, internal / external
7 filter Î entry mask, value between 0 and 9
8 DP Î entry mask, value between 0 and 3
9 PVmin, PVmax, SPmin 4, SPmax 4 Î entry mask,
range of values depending on decimal point DP,
between - 999 / - 99.9 / - 9.99 / - 0.999
and 9999 / 999.9 / 99.99 / 9.99
P.CO TUNE Î selection menu, deactivated / activated
P.TUNEtype 5 Î selection menu, not def. / flow / temp / press / level
6 Direction actuator
5 Direction command
7 Split range
8 X-Limit
9 X-Time
4 Cutoff 1 CUTOFFmin
2 CUTOFFmax 100 %
0 %
1 DIR.CMD rise
1 DIR.ACT rise
1 SRmin
2 SRmax 100 %
0 %
1 LIMmin
2 LIMmax 100 %
0 %
1 X-Time.Open
2 X-Time.Close 1 s
1 s
P-Control 1
1 X-Co.DBDx 1.0 % X-Control
100 2 X-Co.Kx.Close
3 X-Co.Kx.Open 100
1.0 % 1 DBD
2 KP 1.00
999.9 s 3 TN
4 TV 0.0 s
0 % 5 X0
6 Setpoint extern
0 7 Filter
8 DP 1
0.0 9 PVmin
PVmax 999.9
0.0 SPmin 4
999.9
active P.CO TUNE
not def.
SPmax 4
PTUNEtype 5
100 %
45 %
40 %
9 35 %
8 30 % 30.0 % 3
35.0 % 3
40.0 % 3
45.0 % 3
100.0 % 3