Burkert Type 8635 User Manual
Page 45
Advertising
8635 - 43
I
NSTALLATION
Place the SIDE Control on the bracket and fix it with 4 cap screws (3) and lock washers (4).
Place the SIDE Control with the bracket on the part-turn actuator and fix it.
If after starting the function
X.TUNE the message X.ERR 5 appears in the LC display, the
alignment of the axle of the SIDE Control to the axle of the actuator is incorrect.
In this case, check the alignment as described above.
Then repeat the function
X.TUNE.
NOTE
Advertising