Burkert Type 8635 User Manual
Page 76
Advertising
74 - 8635
O
PERATING AND
C
ONTROLLER
F
UNCTIONS
SAFEPOS
Entering the safety positioning
Factory setting: 0 %
SAFEPOS
SPOS XXX
Enter safety position
(0 ... 100 %)
*
With the fast pressurize / fast vent variant, two valves are driven in each case to obtain faster
pressurizing and venting.
*
When the safety position is 0 % or 100 %, the actuator will be
fully vented or pressurized as soon as the safety position is
activated in the supplementary function
SIG-ERR or BIN-IN.
The safety position set is only moved to when a corresponding signal is present at the
binary input (for configuration see
BIN-IN), or on occurrence of a signal error (for
configuration see
SIG-ERR).
This function is executed only in the AUTOMATIC mode.
NOTE
Advertising