Fluidic connection – Burkert Type 8635 User Manual
Page 46
Advertising
44 - 8635
I
NSTALLATION
Fluidic connection
The locations of the fluidic connections are shown in the following drawing:
Connect supply pressure to connection 1.
Connect the service connection 2 to the chamber of the single-acting actuator.
If possible, connect a silencer or the like to connection 3. If the connection is left open, there is a risk
of water splashes entering the SIDE Control.
Exhaust
connection
3
Supply
pressure
connection
1
Service
connection
2
Advertising