SecurityMan Cyber Eye - Manual (Page 17)

CyberEyes User’s Manual Rev.1 15
Step 13: Taking snapshots
Step 14: Manual Recording
If you see something that you
wish to save on the spot,
CyberEyes provides the Camera
Snapshot function. You can
either take a snapshot of a single
channel or a snapshot of the
quad screen. Click on the left Camera
Snapshot button to take a
snapshot of a single channel.
You must make sure you
have highlighted the
particular channel that you
wish to take a snapshot of.
As this case illustrates,
Channel 1 is selected for
snapshot purposes. Click on the right Camera
Snapshot button to take a
snapshot of the quad screen.
You do not need to select any
channel to take a snapshot of the
quad screen. In fact, simply click
on the right Camera Snapshot
button will ensure you have
every channel being taken a
snapshot of.
If you see something that you
wish to record on the spot,
CyberEyes provides the Manual
REC. function. You can either
record for a single channel or the
quad screen. Click on the left Manual REC.
button to record a single
channel. Click again to end the
recording. You must make sure
you have highlighted the
particular channel that you wish
to record. As this case
illustrates, Channel 1 is selected
for snapshot purposes. Click on the right Manual
REC. button to record
the quad screen. You do
not need to select any
channel to record the
quad screen. In fact,
simply click on the right
Manual REC. button will
ensure you have every
channel under recording.