SecurityMan Cyber Eye - Manual (Page 23)

CyberEyes User’s Manual Rev.1 21
CHAPTER 2: SYSTEM REQUIREMENTS
Hardware Requirements
Minimum Computer Requirements for CyberEyes
Ÿ CPU: Celeron 300 or higher
Ÿ Memory: 128 MB
Ÿ Hard disk: 200MB or more (not including disk space to record video)
Recommended Computer Requirements for CyberEyes
Ÿ
CPU: Pentium III 800 or higher
Ÿ Memory: 256 MB
Ÿ Hard disk: 10GB or more (SCSI is recommended)
PC Network adapter: 100 Mbps for LAN/WAN capabilities
PC Modem: Voice modem for dial-up
DQP hardware (4 video inputs + 1 video output)
Camera: Any analog (composite) camera with BNC connector
Operating System Requirements
Ÿ Microsoft Windows 98, Windows 98 SE: DirectX 8.0, MDAC 2.5
Ÿ
Microsoft Windows 2000: DirectX 8.0
Ÿ Microsoft Windows ME: DirectX 8.0
Ÿ Microsoft Windows XP
Other Requirement:
Ÿ Static IP address for the DQP hosting PC end (for remote monitoring connection via LAN or the
Internet)
Note:
Ÿ Internet Explorer 5.0 or higher is required for the above operating systems
Ÿ The computer resolution should be at least 800x600 pixels (small fonts)*
Ÿ Total Performance determined by:
Ÿ
The powerfulness of the hosting computer
Ÿ Camera quality
* Please follow the steps below to configure the computer resolution:
- Right click your mouse on the desktop and choose “Properties” and click on it
- Look for the “Settings” tab and click on it
- Make sure the screen size is set to 800 by 600 pixels
- Look for and click on the “Advanced … ” button while you are still in the “settings” tab
- On the “General” tab, you must make sure that “Small Fonts” and not “Large Fonts” is selected as the Display
Font Size
- Restart your computer when necessary to make the appropriate changes