SecurityMan Cyber Eye - Manual (Page 65)

CyberEyes User’s Manual Rev.1 63
Ÿ
Click the Alarm tab.
Ÿ You can then set the E-mail properties on the E-mail tab, but before doing this, please ensure your
computer is connected to LAN or the Internet.
Ÿ If you send E-mails over LAN and your computer is connected to the network, then please refer to the
following:
Enable E-mail alarm function by
placing a check mark beside E-mail
from the right side of the Schedule
tab. Click and drag to select the time
areas (Right click and drag to remove
the selections). In order for alarm
notifications to take effect, you
must ensure that the time areas
selected for E-mail notification
overlap the time areas selected for
Schedule Record.
•
Input the SMTP address (for
sending outgoing e-mails) in the
Server Address box, and input
your e-mail address in the
Return E-mail box.
•
Use the Add or Delete button to
add or remove the recipient E-
mail addresses (no limit on the
number of recipient e-mail
addresses) in the E-mail to box,
then input contents in the Text
message box.
•
By default, a check mark is
placed beside Attach alarm
image that allows you to attach
the image that triggered the
alarm through e-mail.