SecurityMan Cyber Eye User Manual
Page 68
CyberEyes User’s Manual Rev.1
66
Ÿ
When you are done, click OK. Voice alert will be sent out once an alarm occurs.
Alert
When motion is detected, CyberEyes will automatically play a voice alert on the host computer (the computer
with the DQP connected and CyberEyes installed). You can set different voice alert for different cameras.
Ÿ
To set voice alert:
Ÿ
Click System Setting in the control bar.
Ÿ
Choose and click on the desired channel under Device List, and click Channel Settings.
Enable voice alert by placing a check
mark beside Alert from the right side
of the Schedules tab. Click and drag
to select the time areas (Right click
and drag to remove the selections)
You must ensure that the time
areas selected for Alert
notification overlap the time areas
selected for Schedule Record in
order for alarm notification to take
effect.