SecurityMan Cyber Eye - Manual (Page 69)

CyberEyes User’s Manual Rev.1 67
Ÿ
Click OK when done, and the voice alert will be played on the host computer once an alarm has occurred.
Message (this function is only available if your operating system is Windows 2000 or XP)
When motion is detected, CyberEyes will send a message from the host computer to another computer on
LAN.
Ÿ To set voice alert:
Ÿ Click System Setting in the control bar.
Ÿ Choose and click on the desired channel under Device List, and click Channel Settings.
On the Alarm tab, click the Alert
tab, and you will be able to set the
voice alert properties. The software
has a default audio file that you
could readily use, or you may use
your own audio files. To do so, input
wave file name or browse for a
different audio file (should be
in .WAV format), and then input the
number of times the audio file
should be played when alarm
occurs.