SecurityMan Cyber Eye - Manual (Page 36)

CyberEyes User’s Manual Rev.1 34
Add Device
Use this function to connect a video input source to an unused or spare channel.
To add device:
1. Click System Setting in the control bar, and the System Settings dialog box will appear.
Devices tab
On the Devices tab, the
table under Device List lists
the related channel
information: channel
number, video camera
location, and device
information. Each channel
corresponds to a video input
source.
Click Device
Properties to set
such camera
properties as
brightness,
contrast, hue,
saturation, and
sharpness. Click Add Device
to connect a video
input source to an
unoccupied
channel. Click Remove
Device to break
connection.
Click Channel Settings to
set detailed camera
operations, such as recording
modes, alarm notifications,
motion detection, etc.
There are two tabs in the System Settings window: Devices tab and Others tab.