SecurityMan Cyber Eye - Manual (Page 70)

CyberEyes User’s Manual Rev.1 68
•
Click OK when done, and the message alert will be sent to any computer on LAN once an alarm has
occurred.
Enable voice alert by placing a
check mark beside Message from
the right side of the Schedules tab.
Click and drag to select the time
areas (Right click and drag to
remove the selections) You must
ensure that the time areas
selected for Message notification
overlap the time areas selected
for Schedule Record in order for
alarm notification to take effect.
On the Alarm tab, click the
Message tab, and you will be able
to set the message alert properties.
Enter the computer name on the
same LAN and click the Add button.
Click on the computer name and
click the Delete button to remove
from the computer name list. You
may enter any message that you
wish the recipient to see from this
warning alarm message.