SecurityMan Cyber Eye - Manual (Page 7)

CyberEyes User’s Manual Rev.1 5
Step 5: Channel Settings
Once you click on the System Settings button, you will automatically see the Channel Settings window
similar to the one below.
any day of the week to zoom in to the daily schedule in hours and minutes.
Click on the
System
Settings
button on the
Control Bar to
configure
such settings
as recording
modes,
motion
detection,
alarm
notification
mechanisms,
etc.
You will see Record, Alert, E-mail,
and Phone as active functions, as
this case illustrates, if your operating
system is Windows 98 SE or ME; you
will see Message as an additional
active function if your operating
system is Windows 2000 or XP.
You can activate any function by
clicking on the blank box beside each
function and a check mark will appear
in the box.
Then click anywhere on these areas
and drag with your left mouse button
to select the time frames. Click and
drag with your right mouse button to
remove the selected time frames.
You can set daily schedule or weekly
schedule. If you click and drag to
select, say Monday to Tuesday, then
CyberEyes will record based on the
schedule you set on Monday and
Tuesday of every week. Click on