SecurityMan Cyber Eye - Manual (Page 62)

CyberEyes User’s Manual Rev.1 60
4. Click OK when done.
Ÿ You may also configure CyberEyes to record only motion frames during scheduled-recording mode.
Ÿ To set motion record:
Ÿ
Follow the above three steps in schedule record.
Ÿ On the Storage tab, you will see a check mark is already placed beside the Only record motion
frames in schedule-recording mode function by default.
Ÿ Go to the Advanced tab, and click on the Motion Detection button. Please refer to the Select
Motion Detection Area section in Chapter 5 for more information on how to configure motion
detection settings.
Auto Record
Automatically record images in time-lapse day and night.
Ÿ To auto-record images:
Ÿ Click System Setting in the control bar.
Ÿ Choose and click on the desired channel under Device List, and click Channel Settings.
Ÿ On the Storage tab, place a check mark beside the Enable Auto-record option.
3. Ensure a check mark is placed
beside the Record option on the
right side of the Schedules tab.
Click and drag to select the time
frames for schedule recording.
(Right click and drag to remove
selections.)