SecurityMan Cyber Eye - Manual (Page 38)

CyberEyes User’s Manual Rev.1 36
6. On the Devices tab, click OK, and you will be able to see camera images from the work area.
Remove Device
Use this function to remove a video input source from a connected channel. After the input source is removed
from the channel, all information in this channel will be cleared up and no video will be shown from this channel.
4. The Device Properties dialog
box will appear. Select the
appropriate video format (NTSC
or PAL) from the Select TV
Format pull-down menu. You
can change the parameters for
the camera (brightness,
contrast, hue, saturation, and
sharpness) based on your own
preferences. Note: You can
always come back to this
dialog box and change
camera parameters later. After
you have done all the settings,
click Next to continue.
5. The Finished dialog box will
appear. It indicates that the
camera (video input source) has
been installed successfully.
Click Finish to complete setup.