SecurityMan Cyber Eye - Manual (Page 6)

CyberEyes User’s Manual Rev.1 4
For more information on adding the device, please refer to the Add Device section of Chapter 4: Using
CyberEyes.
Step 3: Camera Mode
After you have added devices to CyberEyes, you must configure the Camera Mode in order to be able to view
all four cameras in quad screen view. To do so, please click on the Camera Mode button of the main window
and choose 4-screen Display. For more information, please refer to Camera Mode of Chapter 4: Using
CyberEyes.
Step 4: System Settings
If you are able to see a quad screen view, you are ready to start configuring the system settings. Because
CyberEyes allows you to make configurations for each camera independent of one another, therefore, click on
a channel that you wish to configure the settings and click on the System Settings button from the Control Bar.
Click on the
Camera
Mode button
on the Control
Bar and
choose 4-
screen
Display to
display four
cameras in
quad screen
view.