SecurityMan Cyber Eye - Manual (Page 30)

CyberEyes User’s Manual Rev.1 28
Ÿ Please wait while Windows restarts itself
Installing the Web Service
Click Install Web Service in Autorun, and then follow steps 5 to 11 from the Installing the CyberEyes main
program starting page 24.
Ÿ Please wait while Windows restarts itself
How to start CyberEyes
After CyberEyes is installed, you may then start the software. Please follow the steps below if you are using
CyberEyes for the first time.
1. Click Start from Windows, point to Programs, point to CyberEyes, and click CyberEyes DQP-A4 v1.0.
The software will ask you to register. For details on registration, please refer to Chapter 7.
To run CyberEyes, please first ensure that a DQP is properly connected to your computer and its driver is
correctly installed. If everything is OK, proceed to step 2.
11. After Setup has finished
copying the necessary files, the
Install Shield Wizard Complete
dialog box will appear. Make sure
the “Yes, I want to restart my
computer now.” Is selected, and
click Finish to complete Setup.
Note: CyberEyes
will automatically
detect whether
the DQP has
been connected
to your computer.
If none of the
DQP is found to
connect to your computer, CyberEyes will then exit.