SecurityMan Cyber Eye - Manual (Page 71)

CyberEyes User’s Manual Rev.1 69
Motion Detection
CyberEyes provides motion detection functions that allow you to monitor specific areas for motion. You can
select multiple areas for motion detection and motion sensitivity to minimize false alarms from occurring.
Ÿ To set motion detection:
Ÿ Click System Setting in the control bar.
Ÿ
Choose and click on the desired channel under Device List, and click Channel Settings.
Ÿ On the Advanced tab, click Motion Detection. The Motion Detection interface will appear.
Select Motion Detection Area
Sometimes you only need to monitor specific areas and not the total area. Therefore, you may set specific
areas for motion detection, and CyberEyes will only trigger an alarm once motion is detected in the selected
areas.
The following table lists the necessary operations to use when you are in the motion detection tab:
Operations Function
Select areas Click and drag the left-mouse button on the
desired areas for motion detection. You may
select multiple areas for motion detection.
Remove areas Click and drag the right-mouse button to
remove the undesired areas for motion
detection.
The left part
of the
interface is
the
selectable
region for
motion
detection,
while the
right part is
the motion
sensitivity
settings
region.