Agilent Technologies Agilent E6474A - Manual (Page 149)

System Information C
Agilent E6474A User’s Guide 149
Power (options 300, 320, 340)
Power (internal GPS, Option 310, 330, 350) 9 to 34 V DC, 9W
9 to 34 V DC, 10W
Transformer AC Power (supplied with
receiver) 100 - 240 Volts AC
50 - 60 Hz
Internal GPS
**
(Option 200)
GPS Receiver 8 Channel internal GPS receiver
Connector type SMA
Differential compatible without dead
reckoning
* It is recommended the input signal level not exceed –25 dBm.
† Adjacent channel desensitization applies to the wideband mode (1.25 MHz IF Filter) and is defined as: 1 dB compression of
tuned signal with interfering signal
±1.25 MHz from tuned signal.
‡ Adjacent channel rejection applies to the narrowband mode (200 kHz IF filter) and is defined as: Suppression of interfering
signal ±
200 kHz from tuned signal.
** Systems fitted with an internal GPS do not support connection to external GPS receivers.
Item Description Specification