Final assembly – Agilent Technologies Agilent E6474A User Manual
Page 63
Advertising
Set Up Your System
3
Agilent E6474A User’s Guide
63
Final assembly
1 Route the USB, antenna, and phone cables through the
openings provided. See
Figure 30
.
2 Close all open panels.
3 Attach the clip-on receiver antenna to the antenna loop of
the pack.
4 Attach the shoulder strap to the D-rings of the pack. See
Figure 31
.
Figure 30
Single receiver backpack (right side view)
Antenna Loop
Direct connect hub
Battery
Side Panels
Receiver
Phone Pouch
Advertising